To Print T-shirt by T-shirt Transfer Paper

To Print T-shirt by T-shirt Transfer Paper

heat transfer paper

T-shirt transfer paper has so many uses, the only limiting factor is your imagination.  Using transfer paper, you can scan doodles or signatures into your pc and print them on tee shirts, bags, sweatshirts and aprons.  Or you can have fun with your digital photos, manipulating them and adding text to them before you create wearable art with them. But do you know what mistakes are there? Following tells you that.
1. Don’t print on the wrong side of the paper. This is a common mistake which is easily avoided. Simply take time to set the paper up correctly in your printer tray to print on the correct side.
2.  Don’t forget to print on mirror mode. This is only relevant when printing on light colours. When printing for a light background, you must remember to switch your printer to mirror mode otherwise your image will appear the wrong way round.
3.  Don’t forget to cut around the image carefully. If you don’t cut round your image carefully enough, you’ll end up with too much fabric sublimation transfer paper left which will reduce the impact of your design.
4.  Don’t iron on a surface which isn’t flat. You must iron your fabric transfer paper on a completely flat surface, otherwise the image will not be sufficiently attached to the fabric.

heat transfer paper
5.  Don’t be frightened to get the iron really hot. It is essential that your iron is set at and has reached its maximum temperature before you iron the transfer.  Also it’s important that if you use a steam iron, the steam is switched off.
6.  Don’t keep the iron still. The problem with irons nowadays is that most irons have indentations on the bottom for steam to pass. If you don’t keep the iron moving while you’re fixing your transfer, there’ll be parts of your image which aren’t stuck down.
7.  Don’t forget to apply enough iron pressure. The whole transfer process relies on pressure to make it work effectively. While moving the iron, you must consciously apply as much pressure as you can in order to get the best effect.
8.  Don’t leave any part of the image un-ironed. Leaving small parts of the image un-ironed is a common mistake particularly on irregular or large images. You must make sure that every corner of the image has been ironed

Follow us:


Contact Us

Website: www.ink-sublimation.com
TEL: 86-025-83228884
FAX: 86-025-83228894
Email: sales@ink-sublimation.com

Top