Easy Ways of Using the Heat Press Transfer Machine

                                       Easy Ways of Using the Heat Press Transfer Machine
     heat press
    1. Determine the temperature at which the decal should be applied and make certain the heat press

used can accommodate it. Also make certain the temperature and pressure provided by the machine

are sufficient to adhere the decal to the transfer item.


    2. Prepare the press for operation. Ensure the power cord is connected properly and that all

necessary switches are turned on and set as outlined in equipment instructions.


    3. Set the press thermostat to the proper temperature for the decal and the item onto which it's

being transferred. In most instances, there will be a light that will remain on until the machine is

heated to the set temperature. When the light goes off, the machine is ready.

    vinyl heat press
    4. Set the press thermostat to the proper temperature for the decal and the item onto which it's

being transferred. In most instances, there will be a light that will remain on until the machine is

heated to the set temperature. When the light goes off, the machine is ready.


    5. Set the press thermostat to the proper temperature for the decal and the item onto which it's

being transferred. In most instances, there will be a light that will remain on until the machine is

heated to the set temperature. When the light goes off, the machine is ready.


    6. Set the press thermostat to the proper temperature for the decal and the item onto which it's

being transferred. In most instances, there will be a light that will remain on until the machine is

heated to the set temperature. When the light goes off, the machine is ready.


    7. Close the heat press, clamping down the heating element pad over the top of the transfer item on

the transfer pad. Lock the press into place in the closed position.

    combo heat press machine
    8. Adjust heat press pressure for the type of item on which the decal is being placed. Thin clothing

items may require less pressure than thicker items such as computer mouse pads.


    9. Set the heat press timer for the amount of time needed to complete the transfer successfully. If

uncertain about the amount of time required, refer to the instructions provided with the decal as well

as the temperature recommendations for the transfer item itself.


    10. Let the press remain closed until the timer goes off. Immediately open the press slowly, being

careful to keep the sublimation decal paper and transfer item from sticking to the heat element pad. It

should remain in place on the transfer rubber pad. 


    11. Let the press remain closed until the timer goes off. Immediately open the press slowly, being

careful to keep the decal and transfer item from sticking to the heat element pad. It should remain in

place on the transfer rubber pad.

    heat transfer paper


Contact Us

Website: www.ink-sublimation.com
TEL: 86-025-83228884
FAX: 86-025-83228894
Email: sales@ink-sublimation.com

Top