How to Solve the Problem - Dye Sublimation Ink Can't Eject by Sublimation Printer Nozzles

In daily production, we often encounter sublimation printer nozzles that suddenly do not eject dye sublimation ink, causing print production to continue. In fact, some problems we can try to deal with, I feel that it is difficult to consult our digital printing service hotline 86628894. So today Skyimage will explain to you, what are the reasons why the digital printing machine suddenly does not inkjet, how to solve it?

The most common causes of failure are two:

1. The data line is damaged; the data line is damaged due to long time or human influence, which affects the data transmission, and the nozzle cannot accept the data, thus stopping the ink supply.

2. The car board is damaged; when the nozzle prints, the car board moves to move with the nozzle, and the ink is printed on the transfer paper. However, if the car board is damaged, the nozzle will not emit ink. And stop moving.

Solution to solve digital printer printhead suddenly do not eject water-based ink:

1. Check if there is any exposed copper wire on the surface of the white data line. If so, please replace the data cable;

2. First use alcohol to clean the car board and try again. If the problem persists, please replace the car board;

3. A single nozzle to test, which nozzle is more plugging, can be replaced.

Okay, Skyimage is chinese sublimation paper manuifacturer, also dealer of dye sublimation ink, printer and heat press, etc. If your sublimation inkjet printer appear some problem, and if you are interested in the materials of sublimtion printing, welcome to contact us at any time. We will provide you the best quality product and service. Hope my article can be useful to you. Thank you for your reading.

Contact Us

TEL: 86-025-83228884
FAX: 86-025-83228894